Table of Contents
Advertisement
6. Remove the ABS connector clip from the frame.
7. Remove the upper engine mount bracket nuts (1).
8. Remove the lower bracket bolts (2).
9. Remove the upper bracket bolt (1) from the bracket.
10. Remove the mount (3) and the lower bracket (4)
from the vehicle.
11. Remove the upper bracket.
Installation Procedure
CAUTION
!
Refer to "Fastener Notice: " in Cautions and
Notices.
1. Install the engine mount (3) and the lower bracket (4)
to the vehicle.
Tightening torque
Tighten the lower bracket bolts to 50 N⋅m (38 lb
ft).
2. Install the ABS connector clip to the frame.
3. Install the upper engine mount bracket nuts (1).
Tightening torque
Tighten the upper engine mount bracket nuts to
50 N⋅m (38 lb ft).
Engine Mechanical:
1D-69
Advertisement
Table of Contents
Troubleshooting
