NOTE
Do not allow oil or other foreign material to
contact the outside diameter (OD) of the
insert.
8. Lubricate the threads of the driver installation tool (2)
with the J 42385-110 (1).
9. Install the insert (2) onto the driver installation tool
(1).
10. Apply threadlock sealant GM P/N 12345493,
(Canadian P/N 10953488), J 42385-109, LOCTITE
277® or equivalent (1) to the insert OD threads (2).
11. Install the insert (2) into the tapped hole by hand
only.
Engine Mechanical:
1D-229