Table of Contents
Advertisement
2. Install the NEW engine front cover to cylinder block
seal.
3. Place a 3 mm (0.118 in) bead of RTV sealant, GM P/
N 12378521 (Canadian P/N 88901148) or
equivalent, on the engine front cover as shown (1).
4. Place the engine front cover onto the EN 46109 and
slide into position.
5. Remove the EN 46109 from the cylinder block.
6. Install the engine front cover deadener.
Engine Mechanical:
1D-319
Advertisement
Table of Contents
Troubleshooting
