Upper To Lower Intake Manifold Assemble Procedure - Suzuki XL7 2007 Service Manual

1D-220 Engine Mechanical:
4. Install the throttle body bolts.
Tightening torque
Tighten the throttle body bolts to 10 N⋅m (89 lb
in).
Upper to Lower Intake Manifold Assemble
Procedure
NOTE
Do not reuse the upper-to-lower intake
manifold gasket and the intake manifold-to-
cylinder head sealing gaskets.
1. Install the NEW upper-to-lower intake manifold
gaskets.
2. Install the upper intake manifold to the lower intake
manifold.
3. Install the upper-to-lower intake manifold bolts.
Tightening torque
Tighten the upper-to-lower intake manifold bolts
to 23 N⋅m (17 lb ft).
Reference: "Intake Manifold Installation: ".