Suzuki XL7 2007 Service Manual page 957

Exhaust Manifold Replacement - Left Side
Removal Procedure
WARNING
!
Refer to "Exhaust Service Caution".
WARNING
!
Refer to "Protective Goggles and Glove
Caution: ".
1. Remove the exhaust manifold heat shield. Refer to
"Exhaust Manifold Heat Shield Replacement - Left
Side".
2. Remove the oil level indicator. Refer to "Oil Level
Indicator and Tube Replacement: ".
3. Remove the catalytic converter to exhaust manifold
nuts (1).
Repair Instructions
4. Remove the exhaust manifold bolts (1).
NOTE
Do not reuse the gasket.
5. Remove the exhaust manifold and gasket. Discard
the gasket.
Installation Procedure
1. Install one exhaust manifold bolt to the exhaust
manifold.
2. Install the NEW exhaust manifold gasket onto the
cylinder head and bolt.
3. Install the exhaust manifold (with gasket) to the
catalytic converter and the cylinder head.
!
Refer to "Fastener Notice: ".
4. Install the remaining exhaust manifold bolts.
Tightening torque
Tighten the bolts to 20 N⋅m (15 lb ft).
Exhaust System:
CAUTION
1K-8