Table of Contents
Advertisement
Crankcase Ventilation Hoses/Pipes
Replacement (Rear)
Removal Procedure
1. Remove the engine cover. Refer to "Fuel Injector
Sight Shield Replacement".
2. Disconnect the positive crankcase ventilation (PVC)
fresh air pipe from the upper intake manifold.
3. Disconnect the PVC foul air pipe from the PVC
valve.
Installation Procedure
1. Connect the PVC foul air pipe to the PVC valve.
2. Connect the PVC fresh air pipe to the upper intake
manifold.
3. Install the engine cover. Refer to "Fuel Injector Sight
Shield Replacement".
Upper Intake Manifold Replacement
Removal Procedure
1. Remove the engine cover. Refer to "Fuel Injector
Sight Shield Replacement".
2. Remove the air cleaner outlet duct.
3. Reposition the fresh air positive crankcase
ventilation (PCV) line (1) from the air cleaner inlet
tube.
4. Disconnect the Electronic Throttle Control (ETC)
electrical connector.
Engine Mechanical:
1D-73
Advertisement
Table of Contents
Troubleshooting
