Table of Contents
Advertisement
1D-80 Engine Mechanical:
Installation Procedure
NOTE
Do not lubricate the crankshaft front oil seal
or the crankshaft balancer sealing surfaces.
1. Use the J 29184 or equivalent to install the
crankshaft front oil seal.
2. Install the crankshaft balancer. Refer to "Crankshaft
Balancer Replacement".
Camshaft Cover Replacement - Left Side
Special tool
EN 46101 Spark Plug Tube Seal Guide
Removal Procedure
1. Remove the left bank spark plugs. Refer to "Spark
Plug Replacement: ".
2. Remove the left camshaft cover bolts.
3. Remove the left camshaft cover from the left cylinder
head.
4. Clean the mating surfaces of the cylinder head and
the camshaft cover. Refer to "Camshaft Cover
Cleaning and Inspection".
5. Install the EN 46101 onto the spark plug tubes of the
left cylinder head.
Installation Procedure
1. Install new camshaft cover bolt grommets prior to
installing the camshaft cover bolts.
Advertisement
Table of Contents
Troubleshooting
