Engine Front Cover Removal (Third Design)
Reference: "Water Pump Removal: ".
Special tool
EN 46105 Camshaft Locking Tool
EN 46111 Crankshaft Rotation Socket
1. Remove the camshaft position sensor bolts.
2. Remove the camshaft position sensors.
3. Remove the camshaft position actuator valve bolts.
4. Remove the camshaft position actuator valves from
the front cover.
5. Remove the engine front cover bolts that hold the
engine front cover deadener into position.
6. Remove the engine front cover deadener.
7. Remove the remaining engine front cover bolts.
Engine Mechanical:
1D-137