Table of Contents
Advertisement
3. Remove the cylinder head with the exhaust
manifold. Refer to "Cylinder Head Removal - Right
Side".
4. Remove and discard the cylinder head gasket.
5. Clean and inspect the cylinder head and the engine
block sealing surfaces. Refer to "Cylinder Head
Cleaning and Inspection" and "Engine Block
Cleaning and Inspection".
6. If necessary, perform the following steps:
– Remove the exhaust manifold from the cylinder
head. Refer to "Exhaust Manifold Removal - Right
Side: ".
– Remove the camshaft. Refer to "Camshaft
Removal - Right Side".
– Disassemble the cylinder head. Refer to "Cylinder
Head Disassemble".
Installation Procedure
1. If necessary, perform the following steps:
– Assemble the cylinder head. Refer to "Cylinder
Head Assemble".
– Install the camshaft. Refer to "Camshaft
Installation - Right Side".
– Install the exhaust manifold to the cylinder head.
Refer to "Exhaust Manifold Installation - Right
Side: ".
2. Install a NEW cylinder head gasket.
3. Carefully install the cylinder head with the exhaust
manifold to the engine. Refer to "Cylinder Head
Installation - Right Side".
4. Install the right bank secondary timing chain. Refer
to "Secondary Camshaft Drive Chain Replacement -
Right Side".
5. Install the engine. Refer to "Engine Replacement".
Engine Mechanical:
1D-119
Advertisement
Table of Contents
Troubleshooting
