Suzuki XL7 2007 Service Manual page 963

Catalytic Converter Replacement - Right
Side
Removal Procedure
WARNING
!
Refer to "Exhaust Service Caution".
WARNING
!
Refer to "Protective Goggles and Glove
Caution: ".
1. Remove the exhaust manifold heat shield. Refer to
"Exhaust Manifold Heat Shield Replacement - Right
Side".
2. Remove the catalytic converter to exhaust manifold
nuts (1).
3. Raise and support the vehicle. Refer to "Lifting and
Jacking the Vehicle: ".
4. Disconnect heated oxygen sensor (HO2S) electrical
connector (2) from the engine wiring harness
electrical connector.
5. Remove the right catalytic converter to exhaust
flexible pipe nuts.
6. Remove the catalytic converter from the vehicle.
7. Remove and discard the catalytic converter to
exhaust manifold gasket (1).
8. Remove and discard the catalytic converter to
exhaust flexible pipe gasket (2).
Exhaust System: 1K-14