Suzuki XL7 2007 Service Manual page 725

Installation Procedure
1. Install a NEW oil suction tube seal onto the oil
suction tube. DO NOT reuse the old oil suction tube
seal.
2. Install the oil suction pipe.
CAUTION
!
Refer to "Fastener Notice: ".
3. Install the oil suction pipe bolts.
Tightening torque
Tighten the oil suction pipe bolts to 10 N⋅m (89 lb
in).
Engine Lubrication System:
4. Install the oil pan scraper.
5. Install the oil pan scraper bolts.
Tightening torque
Tighten the oil pan scraper bolts to 10 N⋅m (89 lb
in).
6. Install the oil pan. Refer to "Oil Pan Replacement".
Oil Level Indicator and Tube Removal
Reference: "Starter Removal: ".
1. Remove the oil level indicator tube bracket bolt.
1E-12