Suzuki XL7 2007 Service Manual page 424

1D-84 Engine Mechanical:
7. Remove the EN 46101 from the spark plug tubes of
the right cylinder head.
8. Install NEW spark plugs into the right cylinder head.
Refer to "Spark Plug Replacement: ".
Engine Front Cover Replacement
Special tool
EN 46105 Camshaft Locking Tool
EN 46111 Crankshaft Rotational Socket
EN 46109 Guide Pin Set
Removal Procedure
1. Remove the lower intake manifold. Refer to "Lower
Intake Manifold Replacement".
2. Remove the camshaft covers. Refer to "Camshaft
Cover Replacement - Left Side" and "Camshaft
Cover Replacement - Right Side".
3. Drain the engine coolant. Refer to "Draining and
Filling Cooling System (LY7 GE 47716 Fill): "
"Draining and Filling Cooling System (LY7 Static Fill):
".
4. Remove the water outlet housing assembly. Refer to
"Water Outlet Housing Replacement: ".
5. Remove the drive belt tensioner. Refer to "Drive Belt
Tensioner Replacement".
6. Remove the water pump. Refer to "Water Pump
Replacement: ".
7. Remove the power steering pump and position
aside. Refer to "Power Steering Pump Replacement:
".
8. Remove the crankshaft balancer. Refer to
"Crankshaft Balancer Replacement".
9. Remove the camshaft position actuator valves from
the front cover. Refer to "Camshaft Position Sensor
Replacement - Bank 2 (Left Side) Exhaust: ",
"Camshaft Position Sensor Replacement - Bank 2
(Left Side) Intake: ", "Camshaft Position Sensor
Replacement - Bank 1 (Right Side) Exhaust: " and
"Camshaft Position Sensor Replacement - Bank 1
(Right Side) Intake: ".
10. Remove the camshaft position actuator solenoid
valves from the front cover. Refer to "Camshaft
Position Actuator Solenoid Valve Solenoid
Replacement - Bank 1 (Right Side) Intake: ",
"Camshaft Position Actuator Solenoid Valve
Solenoid Replacement - Bank 1 (Right Side)
Exhaust: ", "Camshaft Position Actuator Solenoid
Valve Solenoid Replacement - Bank 2 (Left Side)
Intake: ", and "Camshaft Position Actuator Solenoid
Valve Solenoid Replacement - Bank 2 (Left Side)
Exhaust: ".
11. Remove the engine oil pan. Refer to "Oil Pan
Replacement: ".
12. Remove the engine front cover bolts.