Suzuki XL7 2007 Service Manual page 708

1D-368 Engine Mechanical:
Tools and Equipment
• Special tools are listed and illustrated throughout this
section, with a complete listing at the end of the
section. These tools, or their equivalents, are
designed to quickly and safely accomplish the
operations for which they are intended. The use of
these special tools also minimize possible damage to
engine components. Some precision measuring tools
are required for inspection of certain critical
components. Torque wrenches and a torque angle
meter are necessary for the proper tightening of
various fasteners.
• To properly service the engine assembly, the following
items should be readily available:
– Approved eye protection and safety gloves
– A clean, well-lit, work area
– A suitable component cleaning tank
– A compressed air supply
– Trays or storage containers to keep components
and fasteners organized
– An adequate set of hand tools
– Approved engine repair stand
– An approved engine lifting device that adequately
supports the weight of the components
Special Tools - Engine Mechanical - 3.6L
(LY7)
Illustration Tool Number/Description
EN 46101
Spark Plug Tube Seal
Guide
EN 46103
Camshaft Actuator Valve
Seal Remover/Installer
Illustration Tool Number/Description
Camshaft Locking Tool
Flywheel Holding Tool
Timing Chain Retention
Engine Front Cover
Installation Guide Pins
On-Vehicle Valve Spring
EN 46105
EN 46106
EN 46108
Tool
EN 46109
EN 46110
Compressor