Cooling Fan And Fan Clutch - Suzuki 2000 Grand Vitara SQ625 Service Manual

6B-16 ENGINE COOLING
COOLING FAN BELT TENSION INSPECTION
Inspect belt and check belt tension. Refer to "COOLING FAN BELT
TENSION CHECK AND ADJUSTMENT" in this section.

COOLING FAN AND FAN CLUTCH

REMOVAL
1) Disconnect negative (–) cable at battery.
2) Drain cooling system by loosing drain plug (1) of radiator.
3) Disconnect radiator inlet hose from radiator.
4) Loosen cooling fan/clutch nuts.
5) Remove P/S oil tank stay bolts (1) from radiator stay (G16 and
H25 engines only).
6) Remove radiator shroud securing clips.
7) Then remove cooling fan/clutch and radiator shroud.
INSPECTION
Inspect fluid coupling for oil leakage.
If necessary, replace fan clutch assembly. Do not disassemble
clutch assembly.
1. Cooling fan
2. Fan clutch
3. Bimetal