1D-320 Engine Mechanical:
CAUTION
!
Refer to "Fastener Notice: "
7. Loosely install the engine front cover bolts to hold
the engine front cover deadener into position.
8. Loosely install the remaining engine front cover
bolts.
9. Tighten the engine front cover bolts in the sequence
shown (1-22).
Tightening torque
Tighten the engine front cover bolts in the
sequence to 23 N⋅m (17 lb ft).
10. Place the camshaft position actuator valves in
position on the front cover.
11. Install the camshaft position actuator valve bolts.
Tightening torque
Tighten the camshaft position actuator valve
bolts to 10 N⋅m (89 lb in).