Table of Contents
Advertisement
CAUTION
!
Refer to "Fastener Notice: ".
10. Verify the proper placement of the right secondary
camshaft drive chain tensioner gasket tab (1).
a. First Pass
Tightening torque
Tighten the right secondary camshaft drive
chain tensioner bolts to 5 N⋅m (44 lb in).
b. Final Pass
Tightening torque
Tighten the right secondary camshaft drive
chain tensioner bolts to 23 N⋅m (17 lb ft).
11. Release the right camshaft drive chain tensioner by
pulling out the EN 46112 and unlocking the tensioner
plunger.
CAUTION
!
Ensure that all timing chain tensioners are
completely released. A timing chain
tensioner that is not properly released can
lead to serious engine damage.
12. Verify all primary and secondary camshaft drive
chain timing mark alignments (1-18). Also refer to
"Camshaft Timing Drive Chain Alignment Diagram
(Third Design)" "Camshaft Timing Drive Chain
Alignment Diagram (Fourth Design)"- Stage Two.
Reference: "Engine Front Cover Installation (Third
Design): ".
Engine Mechanical:
1D-313
Advertisement
Table of Contents
Troubleshooting
