Table of Contents
Advertisement
CAUTION
!
Refer to "Fastener Notice: ".
3. Install the fuel tank strap bolt.
Tightening torque
Tighten the bolt to 25 N⋅m (18 lb ft).
4. If the vehicle is equipped with AWD, install the
propeller shaft underbody guard loop and bolts.
Tightening torque
Tighten the bolts to 25 N⋅m (18 lb ft).
5. Install the muffler assembly. Refer to "Muffler
Replacement".
Exhaust Heat Shield Replacement - Dash
Panel
Removal Procedure
1. Raise and support the vehicle. Refer to "Lifting and
Jacking the Vehicle: ".
2. Remove the dash panel heat shield nut.
NOTE
The heat shields at the dash panel and the
catalytic converter overlap and utilizing
common rivet attachment points.
3. Drill out the dash panel heat shield rivets.
4. Remove the dash panel heat shield.
Exhaust System:
1K-18
Advertisement
Table of Contents
Troubleshooting
