Suzuki XL7 2007 Service Manual page 1034

2C-7 Rear Suspension:
Stabilizer Shaft Link Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to "Lifting and
Jacking the Vehicle: ".
2. Remove the rear tire and wheel assembly. Refer to
"Tire and Wheel Removal and Installation: ".
3. Loosen the stabilizer shaft clamp bolts.
NOTE
Hold the ball shaft secure with a TORX® bit,
when removing the nut.
4. Remove the stabilizer link to stabilizer shaft nut.
NOTE
When disconnecting the stabilizer link, hold
the link with a wrench to prevent turning.
5. Remove the stabilizer link to lower control arm nut.
6. Remove the stabilizer link from the vehicle.