Installation Procedure
1. Insert the EVAP canister vent solenoid valve into the
EVAP canister, with the valve aligned to the released
position.
2. Rotate vent valve clockwise to secure into the locked
position.
3. Install the EVAP canister. Refer to "Evaporative
Emission Canister Replacement".
Aux. Emission Control Devices:
Evaporative Emission Canister Vent Hose
Replacement
Removal Procedure
1. Remove the fuel fill tube. Refer to "Filler Tube
Replacement: ".
2. Remove the evaporative emission (EVAP) canister
vent tube from the fill pipe clips.
Installation Procedure
1. Install the EVAP canister vent tube to fill pipe clips.
2. Install the fuel fill tube. Refer to "Filler Tube
Replacement: ".
1B-7