Suzuki XL7 2007 Service Manual page 532

1D-192 Engine Mechanical:
2. Inspect the back of the exhaust camshaft position
actuators for the following:
– Sprocket damage (1)
– Camshaft locating pin damage (2)
– Camshaft seating/sealing inner hub flange
damage (3)
– Blockage to the oil passages (4)
– Loose or missing housing bolts (5)
3. Inspect the front of the intake camshaft position
actuators for the following:
– Sprocket damage (1)
– Reluctor/sensor wheel damage (2)
– Camshaft position actuator oil control valve bolt
seating/sealing inner hub flange damage (3)
4. Inspect the back of the intake camshaft position
actuators for the following:
– Sprocket damage (1)
– Camshaft locating pin damage (2)
– Camshaft seating/sealing inner hub flange
damage (3)
– Blockage to the oil passages (4)
– Loose or missing housing bolts (5)
5. Replace a damaged camshaft position actuator.
Camshaft Position Actuator Oil Control Valves
1. Inspect the camshaft position actuator oil control
valves for the following:
– Blockage to the oil passage (1)
– Missing or damaged oil screen clip (2)
– Blockage or damage to the oil screen (3)
– Damage to the sealing surface for the camshaft
position actuator oil control valve solenoid oil seal
(4)
– Damage to the bracket (5)