1D-124 Engine Mechanical:
44. Disconnect the engine electrical wiring harness from
the following components:
– Generator (1)
– Retainer clips (2, 3, 4, 5, 6, 7, 9)
– A/C compressor hose (8)
– Oil pressure switch (10)
– A/C compressor (8)
45. Disconnect the engine electrical wiring harness from
the following components:
– Battery cable (1)
– Retainer clips (2, 3)
– Transmission module (4)
46. If equipped with an engine coolant heater,
disconnect the coolant heater cord.
47. Remove the throttle body assembly. Refer to
"Throttle Body Assembly Replacement".
48. Remove the engine-to-transaxle brace bolts (1, 2)
and brace (3).
49. Remove the starter motor. Refer to "Starter Motor
Replacement: ".