Suzuki XL7 2007 Service Manual page 468

1D-128 Engine Mechanical:
23. Remove the block of wood (1) between the frame
and the engine oil pan used to support the engine
while the bolts were removed from the right engine
mount.
24. On all wheel drive (AWD) models, install the rear
wheel driveshaft. Refer to "Rear Wheel Drive Shaft
Replacement: ".
25. On front wheel drive models, install the right and left
front wheel drive shafts into the transaxle. Refer to
"Front Wheel Drive Shaft Replacement (AWD): "
"Front Wheel Drive Shaft Replacement (FWD): ".
26. On all models, install the right and left lower ball
joints to the steering knuckles. Refer to "Lower
Control Arm Replacement: ".
27. Install the right and left stabilizer shaft links to the
stabilizer shaft. Refer to "Stabilizer Shaft Link
Replacement: ".
28. Install the right and left tie rod ends to the steering
knuckles. Refer to "Rack and Pinion Outer Tie Rod
End Replacement: ".