Table of Contents
Advertisement
Callout
Transfer Case Rear Output Shaft Housing
Tip:
• Inspect for cracks, broken areas, or other damage.
4
• Inspect bearing races for roughness, brinelling, or pitting.
• Inspect the O-ring channel for porosity or damage.
• Scratches or nicks in other areas may be repaired with light sanding.
Transfer Case Rear Output Shaft Splines
5
Tip: Inspect for damage and press fit to flange.
Transfer Case Rear Output Shaft
6
Tip: Inspect for pitting, excessive wear, or damage.
Input Shaft Seal Replacement - Right
Callout
Transfer Case Input Shaft Seal - Right
CAUTION
!
Do not use a screwdriver or punch to remove the seal. Using a screwdriver or punch to
remove the seal may damage the aluminum housing sealing surface.
1
Special Tools
• DT-48074 Input and Output Shaft Seal Installer
• J 8092 Driver Handle
• J 26941 Bushing and Bearing Remover - 3-4 in
• J 45124 Removal Bridge
Component Name
Component Name
Transfer:
3C-19
Advertisement
Table of Contents
Troubleshooting
