Table of Contents
Advertisement
Output Flange Installation
Output Flange Installation
Callout
CAUTION
!
Refer to "Fastener Notice: ".
Fastener Tightening Specifications: Refer to "Fastener Tightening Specifications - Transfer Case - Getrag 760".
Transfer Case Rear Output Shaft Oil Slinger
Tip: Use a press with the DT-48077 in order to install the slinger.
1
Special Tools
DT-48077 Output Shaft Slinger Installer
Transfer Case Rear Output Shaft Flange
Tip: Use a press with the J 5590 to install the flange.
2
Special Tools
J 5590 Pinion Bearing Race Installer - Rear
Transfer Case Rear Output Shaft Nut
Tip: Use a 30 mm socket or J 29873.
Tightening torque
3
235 N⋅m (173 lb ft)
Special Tools
J-08614-A Pinion Flange Holder and Remover
Component Name
Transfer:
3C-25
Advertisement
Table of Contents
Troubleshooting
