Suzuki XL7 2007 Service Manual page 393

Step
1. Remove the clutch pressure plate and clutch driven plate
from the engine flywheel.
2. Inspect the engine flywheel for the following:
– Looseness at the engine crankshaft
– Cracks, warpage and/or damage
– Missing balance weights
3. Inspect the clutch pressure plate and clutch driven plate
15
for the following:
– Loose and/or damaged clutch driven plate damper
springs
– Loose and/or damaged clutch pressure plate diaphragm
springs
– Cracks, warpage and/or damage
– Missing balance weights
Do any of the above conditions exist?
1. Remove the clutch pressure plate and clutch driven plate
from the engine flywheel.
2. Inspect the engine flywheel for the following:
– Looseness at the engine crankshaft
– Cracks, warpage and/or damage
– Missing balance weights
3. Inspect the clutch pressure plate and clutch driven plate
16
for the following:
– Loose and/or damaged clutch driven plate damper
springs
– Loose and/or damaged clutch pressure plate diaphragm
springs
– Cracks, warpage and/or damage
– Missing balance weights
Do any of the above conditions exist?
Re-index the pressure plate to the engine flywheel.
17
Did you complete the re-indexing?
Replace the engine flywheel/flexplate.
18
Did you complete the replacement?
Replace the engine crankshaft balancer.
19
Did you complete the replacement?
Action
Engine Mechanical:
Yes
Go to Step 18 Go to Step 17
Go to "Vibration
Go to Step 18
Diagnostic Aids: "
Go to Step 20
Go to Step 20
Go to Step 20
1D-53
No
—
—
—