Air Cleaner Element Replacement - Suzuki XL7 2007 Service Manual

Jc636
Hide thumbs Also See for XL7 2007:
Table of Contents

Advertisement

Air Cleaner Element Replacement

Removal Procedure
1. Remove the air cleaner outlet duct. Refer to "Air
Cleaner Outlet Duct Replacement".
2. Disconnect the engine wiring harness electrical
connector from the mass air flow (MAF)/intake air
temperature (IAT) sensor.
3. Release the clips (1) on the air cleaner lower half.
4. Open and rotate the air cleaner upper half.
5. Remove the air cleaner element.
Installation Procedure
1. Install the air cleaner element.
2. Rotate and close the air cleaner upper half.
3. Secure the clips (1) on the air cleaner lower half.
4. Connect the engine wiring harness electrical
connector to the MAF/IAT sensor.
5. Install the air cleaner outlet duct. Refer to "Air
Cleaner Outlet Duct Replacement".
Engine Mechanical:
1D-59

Advertisement

Table of Contents
loading

Table of Contents