Suzuki XL7 2007 Service Manual page 780

1F-37 Engine Cooling System:
7. Clip the transmission cooler lines to the fan
assembly.
8. Connect the transmission cooler lines to the radiator.
9. Install the CRFM mounting brackets to the radiator
support.
10. Install the CRFM mounting bracket bolts to the
radiator support.
Tightening torque
Tighten the bolts to 20 N⋅m (15 lb ft).
11. Install the front impact bar. Refer to "Front Bumper
Impact Bar Replacement: ".
12. Install the CRFM closeout panel to the condenser.
13. Install the CRFM closeout panel retainers to the
condenser.
14. Clip the engine wire harness to fan assembly.
CAUTION
!
Refer to Compressor Hose Clearance to the
Exhaust Gas Recirculation (EGR) Pipe
Notice.
15. Install the electrical connectors to the fan motors.
16. Install the front fascia. Refer to "Front Bumper
Fascia Replacement: ".
17. Fill the cooling system. Refer to "Draining and Filling
Cooling System (LY7 GE 47716 Fill)" "Draining and
Filling Cooling System (LY7 Static Fill)".