Table of Contents
Advertisement
2. Position the right secondary camshaft drive chain
shoe.
CAUTION
!
Refer to "Fastener Notice: ".
3. Install the secondary camshaft drive chain shoe bolt.
Tightening torque
Tighten the secondary camshaft drive chain
shoe bolt to 23 N⋅m (17 lb ft).
Reference: "Secondary Camshaft Drive Chain Tensioner
Installation - Right Side (Fourth Design): ".
Secondary Camshaft Drive Chain Tensioner
Installation - Right Side (Third Design)
Special tool
EN 46112 Tensioner Retraction Pins
J 45027 Tensioner Tool
1. Ensure that the right secondary camshaft drive chain
tensioner (1) is being installed.
2. Using the J 45027, reset the right secondary
camshaft drive chain tensioner plunger.
Engine Mechanical:
1D-311
Advertisement
Table of Contents
Troubleshooting
