Table of Contents
Advertisement
1D-242 Engine Mechanical:
11. Spray cleaner GM P/N 12346139, GM P/N
12377981 (Canadian P/N 10953463) or equivalent
into the tapped hole.
NOTE
All chips must be removed from the tapped
hole prior to insert installation.
12. Using compressed air, clean out any chips.
NOTE
• Do not remove the fixture plate, ensure the
fixture plate is installed during the
installation process of the insert.
• Do not allow oil or other foreign material to
contact the outside diameter (OD) of the
insert.
13. Lubricate the threads of the driver installation tool (2)
with the J 42385-110 (1).
14. Install the insert (2) onto the driver installation tool
(1).
Advertisement
Table of Contents
Troubleshooting
