WARNING
!
Refer to "Fuel and Evaporative Emission
Hose/Pipe Connection Cleaning Notice: ".
WARNING
!
Refer to "Safety Glasses Caution: ".
2. Using compressed air, blow any dirt out of the quick-
connect fitting.
3. This step applies to Bartholomew style connectors
ONLY. Squeeze the plastic quick connect fitting
release tabs.
4. This step applies to Q Release style connectors
ONLY. Release the fitting by Pushing the tab toward
the other side of the slot in the fitting.
5. This step applies to Squeeze to Release style
connectors ONLY. Squeeze where indicated by
arrows on both sides of the plastic ring surrounding
the quick connect fitting.
Fuel System:
1G-37