Table of Contents
Advertisement
1D-304 Engine Mechanical:
11. Release the primary camshaft drive chain tensioner
by pulling out the EN 46112 and unlocking the
tensioner plunger.
12. Verify the primary and left secondary camshaft drive
chain timing mark alignments (1-12). Also refer to
"Camshaft Timing Drive Chain Alignment Diagram
(Third Design)" "Camshaft Timing Drive Chain
Alignment Diagram (Fourth Design)"- Stage One.
13. Remove the EN 46105-1 from the rear of the left
camshafts.
14. Using the EN 46111, rotate the crankshaft and
crankshaft sprocket from the stage 1 alignment
position (1) to the stage 2 alignment position (2), 115
crankshaft degrees, in order to install the right
secondary camshaft drive chain components.
Advertisement
Table of Contents
Troubleshooting
