Table of Contents
Advertisement
1D-314 Engine Mechanical:
Secondary Camshaft Drive Chain Tensioner
Installation - Right Side (Fourth Design)
Special tool
EN 46112 Tensioner Retraction Pins
J 45027 Tensioner Tool
1. Ensure that the right secondary camshaft drive chain
tensioner (1) is being installed.
2. Using the J 45027, reset the right secondary
camshaft drive chain tensioner plunger.
3. Install the plunger into the right secondary camshaft
drive chain tensioner body.
4. Compress the plunger into the body and lock the
right secondary camshaft drive chain tensioner by
inserting the EN 46112 into the access hole in the
side of the right secondary camshaft drive chain
tensioner body.
5. Slowly release pressure on the right secondary
camshaft drive chain tensioner. The right secondary
camshaft drive chain tensioner should remain
compressed.
Advertisement
Table of Contents
Troubleshooting
