Table of Contents
Advertisement
2. Place a bead 8 mm (0.3150 in) in diameter by 4 mm
(0.1575 in) in height of RTV sealant, GM P/N
12378521 (Canadian P/N 88901148) or equivalent,
on the engine front cover split lines (1).
3. Place the right camshaft cover into position onto the
right cylinder head.
4. Loosely install the right camshaft cover bolts.
CAUTION
!
Refer to "Fastener Notice: ".
5. Tighten the right camshaft cover bolts in the
sequence shown.
Tightening torque
Tighten the left camshaft cover bolts in the
sequence to 10 N⋅m (89 lb in).
6. Install the power steering reservoir. Refer to "Remote
Power Steering Fluid Reservoir Replacement: ".
Engine Mechanical:
1D-83
Advertisement
Table of Contents
Troubleshooting
