Suzuki XL7 2007 Service Manual page 982

1K-33 Exhaust System:
Fastener Tightening Specifications - Engine Mechanical - 3.6L (LY7)
Crankshaft Position Sensor Bolt
Crankshaft Position Sensor/Right Exhaust Manifold Lower Heat Shield
Bolt
Engine Coolant Temperature (ECT) Sensor
Exhaust Manifold
Bolt
Heat Shield Bolt
Studs
Knock Sensor Bolt
Oxygen Sensor
Pump Converter Pipe
Fastener Tightening Specifications - Engine Exhaust
Catalytic Converter to Exhaust Flexible Pipe Nut
Catalytic Converter to Exhaust Manifold Nut
Catalytic Converter Nut
Dash Panel Heat Shield
Exhaust Manifold Heat Shield Bolt
Exhaust Manifold Bolt
Exhaust Muffler Clamp
Fuel Tank Strap Bolt
Rear Exhaust Manifold Heat Shield Bolt
Tools and Equipment
• Special tools are listed and illustrated throughout this
section, with a complete listing at the end of the
section. These tools, or their equivalents, are
designed to quickly and safely accomplish the
operations for which they are intended. The use of
these special tools also minimize possible damage to
engine components. Some precision measuring tools
are required for inspection of certain critical
components. Torque wrenches and a torque angle
meter are necessary for the proper tightening of
various fasteners.
• To properly service the engine assembly, the following
items should be readily available:
– Approved eye protection and safety gloves
– A clean, well-lit, work area
– A suitable component cleaning tank
– A compressed air supply
– Trays or storage containers to keep components
and fasteners organized
Specifications
Application
Application
Special Tools and Equipment
Specification
Metric
10 N⋅m
50 N⋅m
22 N⋅m
25 N⋅m
10 N⋅m
10 N⋅m
23 N⋅m
40 N⋅m
Specification
Metric
22 N⋅m
50 N⋅m
50 N⋅m
10 N⋅m
10 N⋅m
20 N⋅m
5 N⋅m
25 N⋅m
50 N⋅m
– An adequate set of hand tools
– Approved engine repair stand
– An approved engine lifting device that adequately
supports the weight of the components
Special Tools - Engine Exhaust
Illustration
English
89 lb in
37 lb ft
16 lb ft
18 lb ft
89 lb in
89 lb in
17 lb ft
30 lb ft
English
16 lb ft
37 lb ft
37 lb ft
89 lb in
89 lb in
15 lb ft
44 lb in
18 lb ft
37 lb ft
Tool Number/
Description
J 35314-A
Exhaust Back Pressure
Gage