Table of Contents
Advertisement
1D-332 Engine Mechanical:
Engine Prelubing
Special tool
EN-47971 Oil Pressure Gage Adapter
J 45299 Engine Preluber
NOTE
Ensure the oil cooler lines are disconnected
and the oil filter adapter oil cooler line ports
are blocked in order to direct the oil from the
engine preluber into the engine.
1. Remove the engine oil filter.
CAUTION
!
Special new tool EN 47971 must be used. Due
to the special size and thread pitch of the oil
filter adapter fitting ensure the proper tool is
used or component damage will result.
2. Install the EN-47971 onto the oil filter adapter.
3. Install the 1/8 NPT fitting from the J 45299 into the
port on the EN-47971.
4. Install the J 45299 flexible hose to the fitting.
5. Open the valve of the J 45299.
Advertisement
Table of Contents
Troubleshooting
