Table of Contents
Advertisement
6. Install a NEW right secondary camshaft drive chain
tensioner gasket to the right secondary camshaft
drive chain tensioner.
7. Install the right secondary camshaft drive chain
tensioner bolts through the right secondary camshaft
drive chain tensioner and gasket.
8. Ensure the right secondary camshaft drive chain
tensioner mounting surface on the right cylinder
head does not have any burrs or defects that would
degrade the sealing of the NEW right secondary
camshaft drive chain tensioner gasket.
9. Place the right secondary camshaft drive chain
tensioner into position and loosely install the bolts to
the block.
CAUTION
!
Refer to "Fastener Notice: ".
10. Verify the proper placement of the right secondary
camshaft drive chain tensioner gasket tab (1).
a. First Pass
Tightening torque
Tighten the right secondary camshaft drive
chain tensioner bolts to 5 N⋅m (44 lb in).
b. Final Pass
Tightening torque
Tighten the right secondary camshaft drive
chain tensioner bolts to 23 N⋅m (17 lb ft).
11. Release the right camshaft drive chain tensioner by
pulling out the EN 46112 and unlocking the tensioner
plunger.
Engine Mechanical:
1D-315
Advertisement
Table of Contents
Troubleshooting
