1G-40 Fuel System:
8. Disconnect the fuel feed pipe quick connect fitting (2)
from the fuel tank. Refer to "Plastic Collar Quick
Connect Fitting Service".
9. Cap the fuel and EVAP lines in order to prevent
system contamination.
10. Disconnect the left rear brake line fitting from the
brake crossover pipe.
11. Disconnect the right rear brake line fitting from the
rear brake hose.
12. Remove the push pin (1) from the underbody side
rail hole.
13. With the aid of an assistant, release the fuel/EVAP/
brake pipe clips (2) from the underbody studs.
14. Place the fuel/EVAP/brake pipe assembly on a clean
work surface.