10. Disconnect the left rear brake line fitting from the
brake crossover pipe.
11. Disconnect the right rear brake line fitting from the
rear brake hose.
Aux. Emission Control Devices:
12. Remove the push pin (1) from the underbody side
rail hole.
13. With the aid of an assistant, release the fuel/EVAP/
brake pipe clips (2) from the underbody studs.
14. Place the fuel/EVAP/brake pipe assembly on a clean
work surface.
15. Remove the EVAP pipe from the fuel/EVAP/brake
pipe assembly clips.
1B-9