Table of Contents
Advertisement
1D-250 Engine Mechanical:
16. Apply thread sealant GM P/N 12346004 (Canadian
P/N 10953480) or equivalent on the threads of the
M14 right side oil gallery threaded plug.
17. Install the M14 right side oil gallery threaded plug.
Tightening torque
Tighten the M14 right side oil gallery threaded
plug to 31 N⋅m (23 lb ft).
18. Install the cylinder block-to-oil pan alignment dowels.
19. Install the NEW right front oil pan rail oil gallery
expansion plug.
20. Ensure the NEW right front oil pan rail oil gallery
expansion plug is installed to the proper depth.
21. Install the oil jets.
22. Install the oil jet bolts.
Tightening torque
Tighten the oil jet bolts to 10 N⋅m (89 lb in).
Reference: "Crankshaft and Bearings Installation: ".
Advertisement
Table of Contents
Troubleshooting
