Table of Contents
Advertisement
1D-322 Engine Mechanical:
5. Place a bead 8 mm (0.3150 in) in diameter by 4 mm
(0.1575 in) in height of RTV sealant, GM P/N
12378521 (Canadian P/N 88901148) or equivalent,
on the engine front cover split lines (1).
6. Place the left camshaft cover into position onto the
left cylinder head.
7. Loosely install the left camshaft cover bolts.
CAUTION
!
Refer to "Fastener Notice: ".
8. Tighten the left camshaft cover bolts in the sequence
shown.
Tightening torque
Tighten the left camshaft cover bolts in the
sequence to 10 N⋅m (89 lb in).
Advertisement
Table of Contents
Troubleshooting
