Subaru Legacy 2003 Service Manual page 2859

DIAGNOSTICS CHART WITH DIAGNOSIS CONNECTOR
ABS (DIAGNOSTICS)
9 CHECK ABSCM&H/U.
1) Turn ignition switch to OFF.
2) Connect all connectors.
3) Erase the memory.
4) Perform inspection mode.
5) Read out the DTC.
Is the same DTC still being output?
10 CHECK ANY OTHER DTC APPEARANCE.
Are other DTC being output?
Step Value
Same DTC is not indicated.
Other DTC is not indicated.
ABS-68
Yes
Go to step 10. Replace
ABSCM&H/U.
<Ref. to ABS-6,
ABS Control Mod-
ule and Hydraulic
Control Unit
(ABSCM&H/U).>
A temporary poor Proceed with the
contact. diagnosis corre-
sponding to the
DTC.
No