Subaru Legacy 2003 Service Manual page 2785

Hide thumbs Also See for Legacy 2003:

Table of Contents

8) When inspecting rear tone wheel, remove rear

drive shaft as rear tone wheel is unitized with BJ as-

sembly of rear drive shaft.

<Ref. to DS-34, REMOVAL, Rear Drive Shaft.>

• Be careful not to damage pole piece located

at tip of the sensor and teeth faces during re-

• Do not pull sensor harness during removal.

B: INSTALLATION

1) Install rear drive shaft to the vehicle.

<Ref. to DS-34, INSTALLATION, Rear Drive

2) Temporarily install rear ABS sensor on rear arm.

Be careful not to strike ABS sensor's pole piece

and tone wheel's teeth against adjacent metal

parts during installation.

REAR ABS SENSOR

3) Install rear sensor harness brackets in the origi-

nal positions and install harness on the clip.

Tightening torque:

33 N·m (3.3 kgf-m, 24 ft-lb)

Chapters

Table of Contents