Subaru Legacy 2003 Service Manual page 2807

ABS (DIAGNOSTICS)
6. Subaru Select Monitor
A: OPERATION
1. READ DIAGNOSTIC TROUBLE CODE
(DTC)
1) Prepare Subaru Select Monitor kit.
2) Connect diagnosis cable to Subaru Select Mon-
itor.
3) Insert cartridge into Subaru Select Monitor.
<Ref. to ABS-9, SPECIAL TOOLS, PREPARA-
TION TOOL, General Description.>
4) Connect Subaru Select Monitor to data link con-
nector.
(1) Data link connector located in the lower por-
tion of the instrument panel (on the driver's
side).
( 1 )
(1) Data link connector
(2) Connect diagnosis cable to data link con-
nector.
SUBARU SELECT MONITOR
ABS00111
ABS00112
ABS00290
ABS-16
5) Turn ignition switch to ON (engine OFF) and
Subaru Select Monitor switch to ON.
(1) Power switch
6) On the «Main Menu» display screen, select the
{Each System Check} and press the [YES] key.
7) On the «System Selection Menu» display
screen, select the {Brake Control System} and
press the [YES] key.
8) Press the [YES] key after displayed the informa-
tion of ABS type.
9) On the «ABS Diagnosis» display screen, select
the {Diagnostic Code(s) Display} and press the
[YES] key.
10) On the «Diagnostic Code(s) Display» display
screen, select the {Current Diagnostic Code(s)} or
{History Diagnostic Code(s)} and press the [YES]
key.
NOTE:
• For detailed operation procedure, refer to the
SUBARU SELECT MONITOR OPERATION MAN-
UAL.
• For detailed concerning diagnostic trouble
codes, refer to the LIST OF DIAGNOSTICS TROU-
BLE CODE. <Ref. to ABS-24, List of Diagnostics
Trouble Code (DTC).>
• A maximum of 3 DTC are displayed in order of
occurrence.
• If a particular DTC is not properly stored in mem-
ory (due to a drop in ABSCM&H/U power supply,
etc.) when a problem occurs, the DTC, followed by
a question mark "?", appears on the select monitor
display. This shows it may be an unreliable read-
ing.
Display screen
The most recent trouble code appears
Latest
on the select monitor display.
The second most recent trouble code
Old
appears on the select monitor display.
The third most recent trouble code
Older
appears on the select monitor display.
A specified period of time proceeding
Reference trouble code appears on the select moni-
tor display.
( 1 )
ABS00114
Contents to be monitored