Subaru Legacy 2003 Service Manual page 2774

C: CAUTION
• Wear working clothing, including a cap, protec-
tive goggles, and protective shoes during opera-
tion.
• Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
• Keep the disassembled parts in order and pro-
tect them from dust or dirt.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly, and replacement.
D: PREPARATION TOOL
1. SPECIAL TOOLS
ILLUSTRATION
ST24082AA210
ST22771AA030
2. GENERAL PURPOSE TOOLS
TOOL NAME
Circuit Tester
Pressure Gauge
Oscilloscope
GENERAL DESCRIPTION
TOOL NUMBER DESCRIPTION
24082AA210 CARTRIDGE
22771AA030 SELECT MONITOR
KIT
ABS-5
• Be careful not to burn your hands, because each
part in the vehicle is hot after running.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or safety stands at the specified
points.
• Before disconnecting electrical connectors of
sensors or units, be sure to disconnect ground ca-
ble from battery.
Troubleshooting for electrical systems.
Troubleshooting for electrical systems.
• English: 22771AA030 (Without printer)
• German: 22771AA070 (Without printer)
• French: 22771AA080 (Without printer)
• Spanish: 22771AA090 (Without printer)
REMARKS
Used for measuring resistance, voltage and ampere.
Used for measuring oil pressure.
Used for measuring sensor.
ABS
REMARKS