Subaru Legacy 2003 Service Manual page 2972

12.VDC Off Switch
A: REMOVAL
1. LHD MODEL
1) Remove screws and clip from instrument panel
lower cover.
2) Remove front cover (A) while disconnecting con-
nector.
3) Remove two screws (B) and then remove center
panel (C) while disconnecting connector.
( C )
( B )
( A )
(1) Hook pawl
4) Remove fitting screws, and slightly pull radio and
switch assembly out from center console.
5) Disconnect electric connectors and antenna
feeder cord and then disconnect heater control
unit.
6) Remove screw and detach the bracket and then
remove switch panel.
VDC OFF SWITCH
( 1 )
:
VDC00099
VDC00100
VDC00101
VDC-31
7) Remove VDC off switch by pushing it outward.
2. RHD MODEL
1) Remove front cover, ash tray and center panel.
(1) Center panel
(2) Front cover
2) Remove VDC off switch by pushing it outward.
B: INSTALLATION
Install is in the reverse order of removal.
VDC
VDC00102
( 1 )
( 2 )
VDC00162
VDC00163