DIAGNOSTICS CHART WITH DIAGNOSIS CONNECTOR
Step
11
CHECK VDCCM.
1) Connect all connectors.
2) Erase the memory.
3) Perform inspection mode.
4) Read out the diagnostic trouble code.
Is the same diagnostic trouble code as in
the current diagnosis still being output?
12
CHECK ANY OTHER DIAGNOSTIC TROU-
BLE CODES APPEARANCE.
Are other diagnostic trouble codes being out-
put?
Value
Same DTC indicated.
Other DTC indicated.
VDC-53
VDC (DIAGNOSTICS)
Yes
Replace VDCCM.
Go to step 12.
<Ref. to VDC-8,
VDC Control Mod-
ule (VDCCM).>
Proceed with the
A temporary poor
diagnosis corre-
contact.
sponding to the
NOTE:
diagnostic trouble
Check
code.
and
between VDCCM
and ABS sensor.
No
harness
connectors