Subaru Legacy 2003 Service Manual page 2992

6. VDCCM Connector Cover
A: REMOVE
1) Turn ignition switch OFF.
2) Disconnect connector from VDCCM.
3) Remove band.
4) Remove cable clamp cover.
5) Remove screws securing connector cover.
CAUTION:
Do not allow harness to catch on adjacent parts
during installation.
( 1 )
(1) Connector cover
(2) Band
(3) Cable clamp cover
6) Remove connector cover.
VDCCM CONNECTOR COVER
( 2 )
( 3 )
VDC00129
VDC00130
VDC-19
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Align connector cover rib with connector hole be-
fore installation.
(1) Rib
(2) Hole
VDC (DIAGNOSTICS)
( 1 )
( 2 )
VDC00131