Subaru Legacy 2003 Service Manual page 2949

Hide thumbs Also See for Legacy 2003:

Table of Contents

2. VDC Control Module (VDC-

1) Disconnect battery ground cable.

2) Remove lower cover of instrument panel and

disconnect connectors on the back side of the cov-

3) Remove three bolts which secure the fuse box

onto body side, then move the fuse box aside.

VDC CONTROL MODULE (VDCCM)

4) Remove two bolts which install VDCCM onto

body side bracket.

5) Disconnect connector from VDCCM by pulling

up the securing holder.

6) Remove VDCCM.

Chapters

Table of Contents