Subaru Legacy 2002 Service Manual page 1279

DIAGNOSTICS FOR ENGINE STARTING FAILURE
Engine (DIAGNOSTICS)
No.
9 CHECK INPUT VOLTAGE OF ECM.
1) Connect main relay connector.
2) Turn ignition switch to ON.
3) Measure voltage between ECM connector
and chassis ground.
Connector & terminal
(B137) No. 2 (+) — Chassis ground (–):
(B137) No. 3 (+) — Chassis ground (–):
Step
Is the voltage more than 10
V?
EN(H6)-72
Check Yes
Check ignition
control system.
<Ref. to EN(H6)-
74, IGNITION
CONTROL
SYSTEM, Diag-
nostics for Engine
Starting Failure.>
No
Repair open or
ground short cir-
cuit in harness
between ECM
connector and
main relay con-
nector.