Spare Port Settings – 726
This menu selects the use for the RS-232C connector on the
control panel.
With the third set of soft key indications shown in the SETUP &
DIAG menu, press F6 (SPARE PORT) to display the SPARE
PORT menu.
726 SPARE PORT
•
Function
Mouse
•
•
Com Speed
19200
9600
FUNCTION
COM.
SPEED
SPARE PORT menu soft key indications
Selecting the use of the RS-232C connector – F1
(FUNCTION)
1
Press F1 (FUNCTION), to select the function.
Mouse: an RS-232C interface mouse (PCY-330 or similar)
ISR: Connection to an ISR (Interactive Status Reporting)
system. There are three commands available:
• *IDN?
• *STATUS?
• *MSG?
2
If you selected ISR, press F3 (COM. SPEED) to select the
data transmission rate.
•
•
ISR
Tablet
•
•
•
4800
2400
1200
Chapter 10 Setup Operations
E
G 1 2 3 4 R
10-45